Wagan 2544 User Manual download pdf (Page 12)

500 Peak Amp Jumpstarter with Air Compressor by Wagan Tech

Wagan and wagan.com are trademarks used by Wagan Corporation.

Uncover the dust cover from the Power Port.

Insert the 12V DC accessory plug into the Power Port.

Set the On/Off safety switch to the “ON” position.

Set the power port On/Off switch to the “ON” position by pressing

down the section of the switch marked “I”.

Operate the appliance as usual.

After use, set the power port On/Off switch to the “OFF” position by

pressing down the section of the switch marked “O”.

Disconnect the accessory plug from the Power Port and store the

accessory.

Replace the Power Port’s dust cover.

Recharge the unit as soon as convenient.

USB POWER PORT

Set the On/Off safety switch to the “On” position. A USB Power Port located

underneath the charging jack can power/charge devices that require 5 Volts at

up to 500mA through the use of a user-supplied cord.

STORAGE

This unit may be stored in any position. Make sure the clamps are secure inside

the booster cable storage covers. Store at room temperature. If not used for

a prolonged period of time, recharge every 2 months in the winter and every

month in the summer.

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

Wagan 2544 User Manual Page 12