Smart AC 150 Watt with USB
USER’S MANUAL — Please read before using this equipment.
________________________________________________________________________________________________________________________________________________________________
www.wagan.com
© 2007 Wagan Corporation.
All Rights Reserved.
Wagan and Wagan.com are trademarks used by Wagan Corporation.
FOR POWER CORD WITH CIGARETTE LIGHTER ADAPTER
INSTALLED:
1. Connect the DC cord to the inverter.
2. Insert the DC plug into the vehicles accessory socket
3. Turn the ignition switch to the accessory position, if necessary.
4. Insert appliance plug(s) into AC socket(s) at the front of the
inverter.
5. Turn on the power switch that is located on the front of the Inverter
6. The green LED will light to confirm that AC output is present.
7. After use, turn OFF the inverter and disconnect the plugs from the
accessory socket and inverter.
NOTE FOR VEHICLE USE
This inverter has features that will prevent your battery from being
completely discharged. An audible alarm will sound when the battery
voltage is 10.5 volts. If you hear this alarm we recommend operating your
engine for 10-20 minutes to recharge the vehicle's battery.
FOR AIRLINE USE
1. Connect the DC cord to the inverter.
2. Remove the cigarette lighter plug adapter
3. Plug into Airline accessory socket
4. Insert appliance plug(s) into AC socket(s) at the front of the
inverter.
5. Turn on the power switch that is located on the front of the Inverter
6. The green LED will light to confirm that AC output is present.
7. After use, turn OFF the inverter and disconnect the plug from the Airline
socket.
USB POWER PORT
When the inverter is powered, the USB Power Port provides 5 volts DC up to 0.5
Amps for charging cell phones, PDAs and MP3 players. The user supplies the
charging/power adapter cord.
1. Follow the above instructions to power the inverter.
2. Connect the device to the adapter cord
3. Plug the USB connector into thee USB Port
4. Turn on the device
5. After use, turn off the device and turn off the inverter.
6. Disconnect the USB connector from the inverter.
7. Disconnect the inverter from its power source.
CAUTIONS
If you use a battery charger to recharge your battery, be sure to disconnect the
inverter first. Failure to disconnect the Inverter prior to connecting a charger may
result in an input voltage spike that can damage the Inverter.
Powering this inverter with greater than 15 volts DC can damage the inverter and
void the warranty.
Do not use an extension cord between the DC power source and the DC input of
the Inverter. An extension cord on the DC input can create a voltage drop that can
reduce efficiency and output.
Do not open the case of the inverter. There are no user serviceable parts inside.
(9 pages)
(36 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals