Wagan 2004 Owner's Manual download pdf (Page 261)

261Car care and technical information

5 Turn on the low beam headlights and

place a piece of cardboard or equivalent

(although not directly on the lens) in front

of the headlight not being aimed. This

should allow the beam cut-off of the

headlight being aimed to be seen on the

flat surface.

6 Turn the vertical aiming screw until the

horizontal cut-off of the headlight is

aligned with the horizontal line on the

wall.

NOTICE

Do not cover a headlight directly on the

lens to improve beam cut-off when aim-

ing. Covering a headlight may cause

excessive heat build-up which may cause

damage to the headlight.

IB1953

Horizontal line on wall or other flat surface

IB1954

Correctly adjusted low beam

1 2 ... 256 257 258 259 260 261 262 263 264 265 266 ... 287 288

Comments to this Manuals

No comments