Wagan 2004 Owner's Manual download pdf (Page 66)

66 Instruments and controls

To calculate the arrival time if a specified

average speed is maintained

1 Select Dist using the button.

2 Set the distance to be covered.

3 Press to select Speed Ø.

4 Set the average speed you intend to

drive.

5 Press SET to display the estimated

arrival time.

At the beginning of a journey, the Speed Ø

and Arriv functions will display current val-

ues. If values are set during the journey, the

new values will be displayed after a delay of

about 10 seconds.

Calculating the requisite average speed:

1 Press to select Dist.

2 Set the distance to be covered.

3 Press to select Arriv.

4 Set the desired arrival time.

5 Press SET to display the average speed

you need to maintain to arrive at the

desired time.

At the beginning of a journey, the Speed Ø

and Arriv functions will display current val-

ues. If values are set during the journey, the

new values will be displayed after a delay of

about 10 seconds.

Resetting values

To reset the values, press CLEAR for at

least four seconds.

The following functions will be reset

simultaneously:

• Estimated range on remaining fuel

(function based on a fuel consumption of

28 mpg).

• Average fuel consumption.

• Average speed.

• Arrival time (function based on current

speed).

Programmed values for Dist, Alarm and

Speed W will not be reset (see the respec-

tive function).

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 287 288

Comments to this Manuals

No comments